Electronic device PEI plastic parts

Maoming PFA Plastic Products Entire Line Production Jiangxi Electronic Equipment PEI Plastic Parts

Dongguan Dinghao Plastic Technology Co., Ltd. has a technical team led by industry veterans with many years of experience, advanced management information systems, and integrated management. From production planning and process formulation to quality inspection, inventory, and statistics, computer systems are widely used, and various departments within the company can share information through computer networks.
Advanced process management with a high degree of standardization. Unlike the production organization models adopted by domestic factories, our company relies on advanced process equipment and process routes to ensure part precision and production progress. The company's advanced equipment, technology, and management enable the production of precision and complex molds, which play an extremely important role in promoting the development of industries such as automotive, electronics, and home appliances, and also bring significant economic benefits to our company.

Name: PEI Engineering Plastic Parts

Model: MPT-00410

Length: 9.5±0.5mm

Width: 6.5±0.5mm

Height: 9.5±0.5mm

Material: PEI

Color: Yellow, Blue

Weight: 4g

Note: The above data is for reference only,

Please refer to the actual product,

Customization based on drawings or samples is available

Correct Gate Location for Plastic Mold Steel
Designers must pay special attention not only to the design calculations of plastic products but also to the gate design of the mold. Ensure the correct gate system and the number and location of the main runner are selected. The type and location of the gate significantly impact product quality.
Gate location selection determines the following characteristics of plastic products:
1. Filling behavior;
2. Product dimensions (tolerances);
3. Shrinkage action, warpage;
4. Machine performance level;
5. Surface quality (appearance).
If the designer selects the wrong gate, the results can rarely be modified by optimizing processing parameters during molding. Therefore, design engineers must fully consider the gate location.